2006 GMC Sierra Turbos & Superchargers

Highlights: Eliminates the stock coolant feed line.; Allows Use of Non-Water Cooled Turbochargers

Highlights: 2004.5-2010 Duramax Billet Turbo Resonator Delete Plug (LLY/LBZ/LMM)

Highlights: Creates an extra 1 to 1.5 inch of elevation as needed. A T4 gasket should be used on the top and bottom of the spacer to provide a proper seal.; For use with T4 Turbos installed on Duramax engines;extra inch of elevation;T4 gasket should be used on the top and bottom of the spacer to provide a proper seal

Highlights: (1) Aluminum Intercooler Pipe|(2) Silicone Boots with DuraCore Technology|(4) Constant Tension T-Bolt Clamps|(2) Aluminum Mishimoto M Logo Badges|Mishimoto Lifetime Warranty; Yes; (1) 2.75" Constant-Tension T-Bolt Clamp,(3) 3.25" Constant-Tension T-Bolt Clamps; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).; 3"; Boot 1: 2.44", 3.00",Boot 2: 3.00"

Highlights: Silver; (1) Mishimoto Intercooler|(2) Lower AC Condenser Brackets|(2) Aluminum Spacers|(1) M8 x 1.25 Bolt & Washer|(2) Aluminum Intercooler Pipes w/ CNC Quick-Disconnect Flanges|(1) Aluminum Intercooler Pipe|(3) Silicone Boots with DuraCore Technology|(6) Constant Tension T-Bolt Clamps|(2) Aluminum Mishimoto M Logo Badges|Mishimoto Lifetime Warranty; Yes; (1) 2.75" Constant Tension T-Bolt Clamps; (3) 3.25" Constant Tension T-Bolt Clamps; (2) 4.0" Constant Tension T-Bolt Clamps; Bar-and-Plate; 19.84"; 37.2"; 37.20" x 19.84"; 2.76"; 2.76"; 3"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps.; These clamps have an operating range of 18-35 in-lbs (2-4N*M).,Do not exceed the maximum torque rating of 35 in-lbs (4N*M).; Quick Disconnect; 23.4"; 46"; 9.1"; 3.0" (hot-side); 3.5" (cold-side); Boot 1: 2.44", 3.00"; Boot 2: 3.00"; Boot 2: 3.50"; 4 mm

Highlights: 2 Years Manufacturer Warranty

Highlights: (2) Aluminum Intercooler Pipes w/ CNC Quick-Disconnect Flanges|(1) Silicone Boot with DuraCore Technology|(2) Constant Tension T-Bolt Clamps|(2) Aluminum Mishimoto M Logo Badges|Mishimoto Lifetime Warranty; Yes; (2) 4.0" Constant-Tension T-Bolt Clamps; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).; 3.5"; Boot 1: 3.50"

Highlights: Black; (1) Mishimoto Intercooler|(2) Lower AC Condenser Brackets|(2) Aluminum Spacers|(1) M8 x 1.25 Bolt & Washer|Mishimoto Lifetime Warranty; Yes; Bar-and-Plate; 19.84"; 37.2"; 37.20" x 19.84"; 2.76"; 2.76"; 3"; Quick Disconnect; 23.4"; 46"; 9.1"; 4mm

Highlights: Silicone DuraCore; (3) Silicone Boots with DuraCore Technology|(6) Constant Tension T-Bolt Clamps|Mishimoto Lifetime Warranty; No; 428°F; Silicone; Boot 1: 15188715,Boot 2: 15102148,Boot 3: 15124211; Boot 1: 2.30" Boot 2: 3.00" Boot 3: 3.00"; 572°F; DuraCore™; Heat-Resistant Embedded Fibers; 428°F; Boot 1: 2.70" Boot 2: 3.40" Boot 3: 3.40"; 2

Highlights: Silver; (1) Mishimoto Intercooler|(2) Lower AC Condenser Brackets|(2) Aluminum Spacers|(1) M8 x 1.25 Bolt & Washer|Mishimoto Lifetime Warranty; Yes; Bar-and-Plate; 19.84"; 37.2"; 37.20" x 19.84"; 2.76"; 2.76"; 3"; Quick Disconnect; 23.4"; 46"; 9.1"; 4mm

Highlights: 2 Years Manufacturer Warranty

Highlights: Volcanic Lava Rock,Titanium,96% Silica Fiber,Stainless Steel; (1) Direct-fit Turbo Blanket|(2) Stainless-Steel Springs|(1) Spool Stainless-Steel Wire|(1) Note Card|Mishimoto Lifetime Warranty; No; Turbo Blanket

Highlights: Black; (1) Mishimoto Intercooler|(2) Lower AC Condenser Brackets|(2) Aluminum Spacers|(1) M8 x 1.25 Bolt & Washer|(2) Aluminum Intercooler Pipes w/ CNC Quick-Disconnect Flanges|(1) Aluminum Intercooler Pipe|(3) Silicone Boots with DuraCore Technology|(6) Constant Tension T-Bolt Clamps|(2) Aluminum Mishimoto M Logo Badges|Mishimoto Lifetime Warranty; Yes; (1) 2.75" Constant Tension T-Bolt Clamps; (3) 3.25" Constant Tension T-Bolt Clamps; (2) 4.0" Constant Tension T-Bolt Clamps; Bar-and-Plate; 19.84"; 37.2"; 37.20" x 19.84"; 2.76"; 2.76"; 3"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps.; These clamps have an operating range of 18-35 in-lbs (2-4N*M).,Do not exceed the maximum torque rating of 35 in-lbs (4N*M).; Quick Disconnect; 23.4"; 46"; 9.1"; 3.0" (hot-side); 3.5" (cold-side); Boot 1: 2.44", 3.00"; Boot 2: 3.00"; Boot 2: 3.50"; 4 mm

Highlights: Kit contains Drain Tube; Adapter; Flange Adapter; Drain Gasket; 7/8-14 to -10AN Fitting; 4 Head Bolts; Drain Tube (20 inch end-to-end)

Highlights: Universal Turbo Drain Nipple with Integrated O-Ring Seal (7/8 inch Hose)

Highlights: Comes complete with o-rings.; High quality 6061 aluminum;Anodized black;Fits the block like the factory drain tube;Allows you to use high quality -10 AN hose to route your turbo drain;Comes with o-rings

Highlights: Silver; (1) Mishimoto Intercooler|(2) M12X1.25-14 Bolts|Mishimoto Lifetime Warranty; No; Powder Coated; Bar-and-Plate; 7.2"; 22"; 22.0" x 7.2" x 3.5"; 3.5"; 7 Fins/Inch; 2.5"; 40 psi; 2.5"; 7.5"; 29.5"; 3.75"; 4 mm; (M12) x 1.25; 18.7 lbs