2006 Subaru Impreza Turbos & Superchargers

2006 Subaru Impreza is a wonderful vehicle from the factory. The parts you will find in our catalog will help you bring the best out of your Impreza. We have 158 Turbos & Superchargers available for your 2006 Impreza all priced at lowest possible price backed by FREE SHIPPING. 

We price match competitors ... Shop with confidence. 


Showing of 158 Products
Sort By

Vehicle Specific | Part #: 3005
Fit Note: WRX
Also Fits: 1996-2005 Audi A4, 1999-2003 Audi S3 ... See More
Also Fits: 1996-2005 Audi A4, 1999-2003 Audi S3, 2000-2006 Audi TT, 2006-2013 Mazda 3, 2005-2007 Mazda 6, 1986-1991 Mazda 626, 2007-2012 Mazda CX-7, 1988-1991 Mazda MX-6, 1992-1999 Mitsubishi 3000GT, 1983-1988 Mitsubishi Cordia, 1990-1999 Mitsubishi Eclipse, 1990-1996 Mitsubishi Galant, 1992-2017 Mitsubishi Lancer, 1983-1988 Mitsubishi Starion, 1989-1992 Nissan 180SX, 1993-1998 Nissan 200SX, 1989-1996 Nissan 300ZX, 1989-1994 Nissan Silvia, 1989-2002 Nissan Skyline, 1998-2013 Subaru Forester, 1994-2014 Subaru Impreza, 2003-2009 Subaru Legacy, 1986-1999 Toyota Celica, 1993-1998 Toyota Supra, 1999-2011 Volkswagen Beetle, 1997-2005 Volkswagen GTI, 2000-2004 Volkswagen Jetta, 1996-2005 Volkswagen Passat . See Less
Price: $387.00
Free Shipping
Vehicle Specific | Part #: MMHOSE-SUB-INT6RD
Fit Note: WRX; H4; 2.5L; GAS; Turbocharged; Wagon; AWD
Highlights: Red; Silicone; (3) Silicone Hoses|(7) T-Bolt Clamps|Mishimoto Lifetime Warranty; No; Silicone; Hose 1: 1.09" & 1.30" Hose 2: 1.85" Hose 3: 2.75; Heat-Resistant Embedded Fibers; 330°F; Hose 1: 1.49" & 1.70" Hose 2: 2.25" Hose 3: 3.15
Price: $144.95
Free Shipping
Vehicle Specific | Part #: T9503
Fit Note: WRX
Also Fits: 2001-2013 Subaru Impreza, 2015-2020 Subaru WRX STI
Price: $441.00
Free Shipping
Vehicle Specific | Part #: MMINT-WRX-01G
Fit Note: WRX; H4; 2.5L; GAS; Turbocharged; Wagon; AWD
Also Fits: 2002-2007 Subaru Impreza
Highlights: (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/ Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) BPV Flange Adapter|(1) Resistor Block Relocation Bracket w/ Mounting Hardware|(2) Lower Intercooler Brackets w/ Mounting Hardware|(1) Aluminum Overflow Can w/ Mounting Hardware|(1) Turbo to Hot Pipe Coupler (for stock turbo)|(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)|(1) 2.25" Straight Coupler|(2) 2.75" Straight Couplers|(1) 2.75" x 3.25" Long Straight Coupler|(1) 2.00"-2.75" Transition Coupler|(1) BPV Recirculation Hose|(1) PCV hose|(1) 2.00" T-bolt Clamp|(4) 2.5" T-bolt Clamps|(7) 3" T-bolt Clamps|(1) 1.5" Worm Gear Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) 12" of Thermal Wrap; Yes; Gold; Powder Coated; - Made from polished mandrel-bent aluminum,- 2.75" I.D.,- Includes upper and lower intercooler pipes; (1) 2.00" T-bolt Clamp,(4) 2.5" T-bolt Clamps,(7) 3" T-bolt Clamps; Bar-and-Plate; 8.25"; 28"; 28" x 8.25" x 3.5"; 3.5"; 3.5"; - Made from polished mandrel-bent aluminum,- 2.25" I.D.,- Includes upper and lower intercooler pipes; 2.75"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; - 3.25" Length,- 2.75" I.D.,- 3.00" O.D.,- 4mm thick; 600; 30 psi; 3"; 9"; 44"; 5.5"; - 17.5" length,- 0.45" I.D.,- 0.75" O.D.,- 4mm thick; Hot-Side: 2.25",Cold-Side: 2.75"; (1) Turbo to Hot Pipe Coupler (for stock turbo),(1) Turbo to Hot Pipe Coupler (for aftermarket turbo),(1) 2.25" Straight Coupler,(2) 2.75" Straight Couplers,(1) 2.75" x 3.25" Long Straight Coupler,(1) 2.00"-2.75" Transition Coupler; - Application-specific bend for this kit,- 1.25" I.D.,- 1.50" O.D.,- 4mm thick; 3.5mm; 25.5 lbs
Price: $1,236.95
Free Shipping
Vehicle Specific | Part #: MMINT-WRX-01SL
Fit Note: WRX; H4; 2.5L; GAS; Turbocharged; Wagon; AWD
Also Fits: 2002-2007 Subaru Impreza
Highlights: (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/ Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) BPV Flange Adapter|(1) Resistor Block Relocation Bracket w/ Mounting Hardware|(2) Lower Intercooler Brackets w/ Mounting Hardware|(1) Aluminum Overflow Can w/ Mounting Hardware|(1) Turbo to Hot Pipe Coupler (for stock turbo)|(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)|(1) 2.25" Straight Coupler|(2) 2.75" Straight Couplers|(1) 2.75" x 3.25" Long Straight Coupler|(1) 2.00"-2.75" Transition Coupler|(1) BPV Recirculation Hose|(1) PCV hose|(1) 2.00" T-bolt Clamp|(4) 2.5" T-bolt Clamps|(7) 3" T-bolt Clamps|(1) 1.5" Worm Gear Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) 12" of Thermal Wrap; Yes; Silver; Powder Coated; - Made from polished mandrel-bent aluminum,- 2.75" I.D.,- Includes upper and lower intercooler pipes; (1) 2.00" T-bolt Clamp,(4) 2.5" T-bolt Clamps,(7) 3" T-bolt Clamps; Bar-and-Plate; 8.25"; 28"; 28" x 8.25" x 3.5"; 3.5"; 3.5"; - Made from polished mandrel-bent aluminum,- 2.25" I.D.,- Includes upper and lower intercooler pipes; 2.75"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; - 3.25" Length,- 2.75" I.D.,- 3.00" O.D.,- 4mm thick; 600; 30 psi; 3"; 9"; 44"; 5.5"; - 17.5" length,- 0.45" I.D.,- 0.75" O.D.,- 4mm thick; Hot-Side: 2.25",Cold-Side: 2.75"; (1) Turbo to Hot Pipe Coupler (for stock turbo),(1) Turbo to Hot Pipe Coupler (for aftermarket turbo),(1) 2.25" Straight Coupler,(2) 2.75" Straight Couplers,(1) 2.75" x 3.25" Long Straight Coupler,(1) 2.00"-2.75" Transition Coupler; - Application-specific bend for this kit,- 1.25" I.D.,- 1.50" O.D.,- 4mm thick; 3.5mm; 25.5 lbs
Price: $1,205.95
Free Shipping
Vehicle Specific | Part #: 3001
Fit Note: WRX
Also Fits: 2005-2007 Mazda 6, 1986-1991 Mazda 626 ... See More
Also Fits: 2005-2007 Mazda 6, 1986-1991 Mazda 626, 2007-2012 Mazda CX-7, 1988-1991 Mazda MX-6, 1992-1999 Mitsubishi 3000GT, 1983-1988 Mitsubishi Cordia, 1990-1996 Mitsubishi Galant, 1992-2017 Mitsubishi Lancer, 1983-1988 Mitsubishi Starion, 1989-1992 Nissan 180SX, 1993-1998 Nissan 200SX, 1989-1996 Nissan 300ZX, 1989-1994 Nissan Silvia, 1989-2002 Nissan Skyline, 1998-2013 Subaru Forester, 1994-2014 Subaru Impreza, 1998-2009 Subaru Legacy, 1986-1999 Toyota Celica, 1993-1998 Toyota Supra . See Less
Price: $78.30
Free Shipping
Vehicle Specific | Part #: MMTMIC-WRX-01SLBL
Fit Note: WRX; H4; 2.5L; GAS; Turbocharged; Wagon; AWD
Also Fits: 2002-2007 Subaru Impreza
Highlights: (1) Bar-and-Plate Intercooler|(5) Silicone Hoses and Couplers|(1) High-Temp Silicone \xc3\xb1S hose|(2) 3" T-bolt Clamps|(1) 2.75" T-bolt Clamp|(1) 2.25" T-bolt Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) WRX specific BPV hose|(1) STI specific BPV hose|(1) Intercooler to throttle body coupler|(1) PCV hose; No; D-759; Silver; Blue; (2) 3" T-bolt Clamps,(1) 2.75" T-bolt Clamp,(1) 2.25" T-bolt Clamp; Bar-and-Plate; 6"; 19"; 19" x 6" x 3.5"; 3.5"; 3.5"; Internal: 6.5mm fin height, 2mm fin pitch,External: 6.5mm fin height, 1.7mm fin pitch; -1.81" I.D. / 2.20" O.D. - On turbo outlet,-2.20" I.D. / 2.60" O.D. - After turbo oulet,-5mm hose thickness,-Withstands up to 400°F (204°C) temps,-Fits on turbos with 1.97" (50mm) maximum compressor outlet size,-Reinforced with 7 internal steel rings for increased durability; 2.5"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.125" length,2.75" I.D.,3.00" O.D.,4mm thick; 305; 20-22 psi; 2.75"; 11.25"; 22.25"; 3.625"; 17.5" length,.45" I.D.,.75" O.D.,4mm thick; (5) Silicone Hoses and Couplers,(1) Intercooler to Throttle Body Coupler; 1.16" - 1.30" I.D.,1.56" - 1.70" O.D.,5mm hose thickness; 1.16" - 1.30" I.D.,1.56" - 1.70" O.D.,5mm hose thickness; 3.5 mm; 17.25 lbs
Price: $700.95
Free Shipping
Vehicle Specific | Part #: MMINT-WRX-01BK
Fit Note: WRX; H4; 2.5L; GAS; Turbocharged; Wagon; AWD
Also Fits: 2002-2007 Subaru Impreza
Highlights: (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/ Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) BPV Flange Adapter|(1) Resistor Block Relocation Bracket w/ Mounting Hardware|(2) Lower Intercooler Brackets w/ Mounting Hardware|(1) Aluminum Overflow Can w/ Mounting Hardware|(1) Turbo to Hot Pipe Coupler (for stock turbo)|(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)|(1) 2.25" Straight Coupler|(2) 2.75" Straight Couplers|(1) 2.75" x 3.25" Long Straight Coupler|(1) 2.00"-2.75" Transition Coupler|(1) BPV Recirculation Hose|(1) PCV hose|(1) 2.00" T-bolt Clamp|(4) 2.5" T-bolt Clamps|(7) 3" T-bolt Clamps|(1) 1.5" Worm Gear Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) 12" of Thermal Wrap; Yes; Black; Powder Coated; - Made from polished mandrel-bent aluminum,- 2.75" I.D.,- Includes upper and lower intercooler pipes; (1) 2.00" T-bolt Clamp,(4) 2.5" T-bolt Clamps,(7) 3" T-bolt Clamps; Bar-and-Plate; 8.25"; 28"; 28" x 8.25" x 3.5"; 3.5"; 3.5"; - Made from polished mandrel-bent aluminum,- 2.25" I.D.,- Includes upper and lower intercooler pipes; 2.75"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; - 3.25" Length,- 2.75" I.D.,- 3.00" O.D.,- 4mm thick; 600; 30 psi; 3"; 9"; 44"; 5.5"; - 17.5" length,- 0.45" I.D.,- 0.75" O.D.,- 4mm thick; Hot-Side: 2.25",Cold-Side: 2.75"; (1) Turbo to Hot Pipe Coupler (for stock turbo),(1) Turbo to Hot Pipe Coupler (for aftermarket turbo),(1) 2.25" Straight Coupler,(2) 2.75" Straight Couplers,(1) 2.75" x 3.25" Long Straight Coupler,(1) 2.00"-2.75" Transition Coupler; - Application-specific bend for this kit,- 1.25" I.D.,- 1.50" O.D.,- 4mm thick; 3.5mm; 25.5 lbs
Price: $1,205.95
Free Shipping
Vehicle Specific | Part #: MMHOSE-SUB-INT4RD
Fit Note: WRX STI; H4; 2.5L; GAS; Turbocharged; Sedan; AWD
Highlights: Red; Silicone; (3) Silicone Hoses|(2) 3" T-Bolt Clamps|(2) 2.25" T-Bolt Clamps|(1) 1.5" T-Bolt Clamp|(1) 1.25" T-Bolt Clamp|Mishimoto Lifetime Warranty; No; Silicone; Hose 1: 1.16" & 1.30" Hose 2: 2.50" Hose 3: 1.80" & 1.90"; Heat-Resistant Embedded Fibers; 330°F; Hose 1: 1.56" & 1.70" Hose 2: 2.90" Hose 3: 2.20" & 2.30"
Price: $109.07
Free Shipping
Vehicle Specific | Part #: MMHOSE-SUB-INT6BL
Fit Note: WRX; H4; 2.5L; GAS; Turbocharged; Wagon; AWD
Highlights: Blue; Silicone; (3) Silicone Hoses|(7) T-Bolt Clamps|Mishimoto Lifetime Warranty; No; Silicone; Hose 1: 1.09" & 1.30" Hose 2: 1.85" Hose 3: 2.75; Heat-Resistant Embedded Fibers; 330°F; Hose 1: 1.49" & 1.70" Hose 2: 2.25" Hose 3: 3.15
Price: $144.95
Free Shipping
Vehicle Specific | Part #: MMHOSE-SUB-INT4BK
Fit Note: WRX STI; H4; 2.5L; GAS; Turbocharged; Sedan; AWD
Highlights: Black; Silicone; (3) Silicone Hoses|(2) 3" T-Bolt Clamps|(2) 2.25" T-Bolt Clamps|(1) 1.5" T-Bolt Clamp|(1) 1.25" T-Bolt Clamp|Mishimoto Lifetime Warranty; No; Silicone; Hose 1: 1.16" & 1.30" Hose 2: 2.50" Hose 3: 1.80" & 1.90"; Heat-Resistant Embedded Fibers; 330°F; Hose 1: 1.56" & 1.70" Hose 2: 2.90" Hose 3: 2.20" & 2.30"
Price: $109.07
Free Shipping
Vehicle Specific | Part #: MMTMIC-WRX-01SLRD
Fit Note: WRX; H4; 2.5L; GAS; Turbocharged; Wagon; AWD
Also Fits: 2002-2007 Subaru Impreza
Highlights: (1) Bar-and-Plate Intercooler|(5) Silicone Hoses and Couplers|(1) High-Temp Silicone \xc3\xb1S hose|(2) 3" T-bolt Clamps|(1) 2.75" T-bolt Clamp|(1) 2.25" T-bolt Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) WRX specific BPV hose|(1) STI specific BPV hose|(1) Intercooler to throttle body coupler|(1) PCV hose; No; D-759; Silver; Red; (2) 3" T-bolt Clamps,(1) 2.75" T-bolt Clamp,(1) 2.25" T-bolt Clamp; Bar-and-Plate; 6"; 19"; 19" x 6" x 3.5"; 3.5"; 3.5"; Internal: 6.5mm fin height, 2mm fin pitch,External: 6.5mm fin height, 1.7mm fin pitch; -1.81" I.D. / 2.20" O.D. - On turbo outlet,-2.20" I.D. / 2.60" O.D. - After turbo oulet,-5mm hose thickness,-Withstands up to 400°F (204°C) temps,-Fits on turbos with 1.97" (50mm) maximum compressor outlet size,-Reinforced with 7 internal steel rings for increased durability; 2.5"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.125" length,2.75" I.D.,3.00" O.D.,4mm thick; 305; 20-22 psi; 2.75"; 11.25"; 22.25"; 3.625"; 17.5" length,.45" I.D.,.75" O.D.,4mm thick; (5) Silicone Hoses and Couplers,(1) Intercooler to Throttle Body Coupler; 1.16" - 1.30" I.D.,1.56" - 1.70" O.D.,5mm hose thickness; 1.16" - 1.30" I.D.,1.56" - 1.70" O.D.,5mm hose thickness; 3.5 mm; 17.25 lbs
Price: $700.95
Free Shipping
Vehicle Specific | Part #: MMHOSE-SUBJ-INT4RD
Fit Note: WRX STI; H4; 2.5L; GAS; Turbocharged; Sedan; AWD
Highlights: Red; Silicone; (4) Silicone Hoses|(8) T-Bolt Clamps|Mishimoto Lifetime Warranty; No; Silicone; Hose 1: 1.16" & 1.30" Hose 2: 1.80" & 1.90" Hose 3: 2.00" Hose 4: 2.80"; Heat-Resistant Embedded Fibers; 330°F; Hose 1: 1.56" & 1.70" Hose 2: 2.20" & 2.30" Hose 3: 2.40" Hose 4: 3.20"
Price: $115.49
Free Shipping
Vehicle Specific | Part #: T9003
Fit Note: WRX
Also Fits: 2001-2013 Subaru Impreza, 2015-2020 Subaru WRX STI
Price: $298.80
Free Shipping
Vehicle Specific | Part #: T9103
Fit Note: WRX
Also Fits: 2001-2013 Subaru Impreza, 2015-2020 Subaru WRX STI
Price: $184.50
Free Shipping
Vehicle Specific | Part #: MMHOSE-SUB-INT4BL
Fit Note: WRX STI; H4; 2.5L; GAS; Turbocharged; Sedan; AWD
Highlights: Blue; Silicone; (3) Silicone Hoses|(2) 3" T-Bolt Clamps|(2) 2.25" T-Bolt Clamps|(1) 1.5" T-Bolt Clamp|(1) 1.25" T-Bolt Clamp|Mishimoto Lifetime Warranty; No; Silicone; Hose 1: 1.16" & 1.30" Hose 2: 2.50" Hose 3: 1.80" & 1.90"; Heat-Resistant Embedded Fibers; 330°F; Hose 1: 1.56" & 1.70" Hose 2: 2.90" Hose 3: 2.20" & 2.30"
Price: $109.07
Free Shipping
Vehicle Specific | Part #: MMHOSE-SUB-INT6BK
Fit Note: WRX; H4; 2.5L; GAS; Turbocharged; Wagon; AWD
Highlights: Black; Silicone; (3) Silicone Hoses|(7) T-Bolt Clamps|Mishimoto Lifetime Warranty; No; Silicone; Hose 1: 1.09" & 1.30" Hose 2: 1.85" Hose 3: 2.75; Heat-Resistant Embedded Fibers; 330°F; Hose 1: 1.49" & 1.70" Hose 2: 2.25" Hose 3: 3.15
Price: $144.95
Free Shipping
Vehicle Specific | Part #: MMHOSE-SUBJ-INT4BK
Fit Note: WRX STI; H4; 2.5L; GAS; Turbocharged; Sedan; AWD
Highlights: Black; Silicone; (4) Silicone Hoses|(8) T-Bolt Clamps|Mishimoto Lifetime Warranty; No; Silicone; Hose 1: 1.16" & 1.30" Hose 2: 1.80" & 1.90" Hose 3: 2.00" Hose 4: 2.80"; Heat-Resistant Embedded Fibers; 330°F; Hose 1: 1.56" & 1.70" Hose 2: 2.20" & 2.30" Hose 3: 2.40" Hose 4: 3.20"
Price: $115.49
Free Shipping
Showing 1 to 18 of 158 (9 Pages)
Showing 1 to 18 of 158 (9 Pages)