H&R Triple C Camber Adjustment Bolts measuring 15mm in diameter and 35.0-43.0mm (1.38-1.69in) in length, 2 pieces. Triple C Camber Bolts are used to adjust the camber to achieve negative or positive camber depending on the intended use Their cam eccentric design allows up to +/- 3° adjustment on most applications.
Whenever you lower a vehicle’s ride height, negative camber is increased. How much depends on the vehicles and the reduction in ride height.
H&R Triple C Camber Adjustment Bolts are a simple, yet very effective part for removing excessive camber, adjusting your vehicle camber settings, or even correcting small side-to-side camber variations for precise alignment.
Consisting of a pair of specially design bolts, H&R patented Triple C Camber Adjustment Bolts replace the original upper fastening bolts on McPherson strut applications. As the bolt is turned, a small cam eccentric alter the vehicle camber allowing adjustment from 0-3 degrees, positive or negative.
Triple C Camber Adjustment Bolts available in multiple diameters ranging from 12-17mm.
Installation takes only minutes with readily available hand tools. To help you determine the correct size bolt for your application, you can use the sketch below.
|
California Residents: Prop 65 WARNING |
| Qty Sold: | Sold in Pairs |
| Bolt Diameter: | 15mm |
| Strut Bracket Width: | 35.0-43.0mm (1.38-1.69in) |
