Subaru Intercoolers

Highlights: (1) Top-Mount Intercooler|(1) Intercooler to Throttle-Body Hose|(1) Turbo to Intercooler O-Ring Gasket; No; D-759; Black; Red; Bar-and-Plate; 11"; 11"; 11" x 11" x 3.5"; 3.5"; 3.5"; Internal: 6.5mm fin height, 2.8mm fin pitch,External: 6.5mm fin height, 1.7mm fin pitch; 1.875"; 2.75" I.D.,3.15" O.D.,4mm thick; 350 whp; 30 psi; 2.75"; 12.5"; 18.5"; 5"; 3.5mm; 21 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Optional Charge-Pipe|(1) Intercooler Mounting Bracket|(1) Air Diverter with Attached Rubber Gaskets|(1) Charge-Pipe to Intercooler Hose|(1) Intercooler to Throttle Body Hose|(3) Bypass Valve Hoses|(2) 3" T-bolt Clamp|(2) 3.5" T-bolt Clamp|(4) Worm-Gear Clamps|Mounting Hardware|Mishimoto Lifetime Warranty; No; D-759; Black; Black; Powder Coated; (2) 3" T-bolt Clamp,(2) 3.5" T-bolt Clamp,(4) Worm-Gear Clamps; Bar-and-Plate; 15" x 10" x 4"; 4"; Internal: 4.7mm fin height, 2.8mm fin pitch,External: 4.7mm fin height, 1.7mm fin pitch; I.D. 2.19" at the turbo, transitioning to 2.60" at the intercooler hose,O.D. 2.75" at the intercooler hose,CHARGE-PIPE TO INTERCOOLER HOSE SPECS,2.75" I.D.,3.15" O.D.,4mm thick; 2.5"; 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.75" I.D.,3.15" O.D.,4mm thick; 450; 35 psi; 3"; 10"; 24"; 5"; ID:,2.19" at the turbo transitioning to 2.60" at the intercooler hose,OD:,2.75" at the intercooler hose; 3.5mm; 24.5 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/ Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) BPV Flange Adapter|(1) Resistor Block Relocation Bracket w/ Mounting Hardware|(2) Lower Intercooler Brackets w/ Mounting Hardware|(1) Aluminum Overflow Can w/ Mounting Hardware|(1) Turbo to Hot Pipe Coupler (for stock turbo)|(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)|(1) 2.25" Straight Coupler|(2) 2.75" Straight Couplers|(1) 2.75" x 3.25" Long Straight Coupler|(1) 2.00"-2.75" Transition Coupler|(1) BPV Recirculation Hose|(1) PCV hose|(1) 2.00" T-bolt Clamp|(4) 2.5" T-bolt Clamps|(7) 3" T-bolt Clamps|(1) 1.5" Worm Gear Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) 12" of Thermal Wrap; Yes; Gold; Powder Coated; - Made from polished mandrel-bent aluminum,- 2.75" I.D.,- Includes upper and lower intercooler pipes; (1) 2.00" T-bolt Clamp,(4) 2.5" T-bolt Clamps,(7) 3" T-bolt Clamps; Bar-and-Plate; 8.25"; 28"; 28" x 8.25" x 3.5"; 3.5"; 3.5"; - Made from polished mandrel-bent aluminum,- 2.25" I.D.,- Includes upper and lower intercooler pipes; 2.75"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; - 3.25" Length,- 2.75" I.D.,- 3.00" O.D.,- 4mm thick; 600; 30 psi; 3"; 9"; 44"; 5.5"; - 17.5" length,- 0.45" I.D.,- 0.75" O.D.,- 4mm thick; Hot-Side: 2.25",Cold-Side: 2.75"; (1) Turbo to Hot Pipe Coupler (for stock turbo),(1) Turbo to Hot Pipe Coupler (for aftermarket turbo),(1) 2.25" Straight Coupler,(2) 2.75" Straight Couplers,(1) 2.75" x 3.25" Long Straight Coupler,(1) 2.00"-2.75" Transition Coupler; - Application-specific bend for this kit,- 1.25" I.D.,- 1.50" O.D.,- 4mm thick; 3.5mm; 25.5 lbs

Highlights: Gold; (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) Air Intake Bracket|(1) 2.25" 45° Coupler|(1) 2.25" to 2.75" 45° Transition Coupler|(1) 2.5" to 2.75" 55° Transition Coupler|(1) 2.5" to 2.75" 65° Transition Coupler|(1) 3.00" Straight Coupler|(1) BPV Recirculation Hose|(1) BPV Vacuum Hose|(1) 30-45mm Worm Gear Clamp|(2) 1.75" T-Bolt Clamps|(3) 2.5" T-Bolt Clamps|(2) 2.75" T-Bolt Clamps|(5) 3" T-Bolt Clamps|Mishimoto Lifetime Warranty; No; D-759; Powder Coated; -Made from Polished Mandrel-Bent Aluminum,-2.5" & 2.75" I.D. Pipes,-Includes Upper and Lower Intercooler Pipes; (2) 1.75" T-Bolt Clamps,(3) 2.5" T-Bolt Clamps,(2) 2.75" T-Bolt Clamps,(5) 3" T-Bolt Clamps; Bar-and-Plate; 8.05"; 28"; 28" x 8.05" x 3.5"; 3.5"; 3.5"; -Made from Polished Mandrel-Bent Aluminum,-2.25" I.D.,-Hot-Side has CNC-Machined Flange for a Leak Free Connection to Turbo,-Includes Two Lower Intercooler Pipes; 2.45"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 600 whp; 30 psi; 2.75"; 8.6"; 37.7"; 5.4"; Hot-Side: 2.25",Cold-Side: 2.5"& 2.75"; Aluminum; (1) 2.25" 45° Coupler,(1) 2.25" to 2.75" 45° Transition Coupler,(1) 2.5" to 2.75" 55° Transition Coupler,(1) 2.5" to 2.75" 65° Transition Coupler,(1) 2.75" Straight Coupler; 3.5mm

Highlights: (1) Top-Mount Intercooler|(1) Intercooler to Throttle-Body Hose|(1) Turbo to Intercooler O-Ring Gasket; No; D-759; Silver; Red; Bar-and-Plate; 11"; 11"; 11" x 11" x 3.5"; 3.5"; 3.5"; Internal: 6.5mm fin height, 2.8mm fin pitch,External: 6.5mm fin height, 1.7mm fin pitch; 1.875"; 2.75" I.D.,3.15" O.D.,4mm thick; 350 whp; 30 psi; 2.75"; 12.5"; 18.5"; 5"; 3.5mm; 21 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/ Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) BPV Flange Adapter|(1) Resistor Block Relocation Bracket w/ Mounting Hardware|(2) Lower Intercooler Brackets w/ Mounting Hardware|(1) Aluminum Overflow Can w/ Mounting Hardware|(1) Turbo to Hot Pipe Coupler (for stock turbo)|(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)|(1) 2.25" Straight Coupler|(2) 2.75" Straight Couplers|(1) 2.75" x 3.25" Long Straight Coupler|(1) 2.00"-2.75" Transition Coupler|(1) BPV Recirculation Hose|(1) PCV hose|(1) 2.00" T-bolt Clamp|(4) 2.5" T-bolt Clamps|(7) 3" T-bolt Clamps|(1) 1.5" Worm Gear Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) 12" of Thermal Wrap; Yes; Silver; Powder Coated; - Made from polished mandrel-bent aluminum,- 2.75" I.D.,- Includes upper and lower intercooler pipes; (1) 2.00" T-bolt Clamp,(4) 2.5" T-bolt Clamps,(7) 3" T-bolt Clamps; Bar-and-Plate; 8.25"; 28"; 28" x 8.25" x 3.5"; 3.5"; 3.5"; - Made from polished mandrel-bent aluminum,- 2.25" I.D.,- Includes upper and lower intercooler pipes; 2.75"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; - 3.25" Length,- 2.75" I.D.,- 3.00" O.D.,- 4mm thick; 600; 30 psi; 3"; 9"; 44"; 5.5"; - 17.5" length,- 0.45" I.D.,- 0.75" O.D.,- 4mm thick; Hot-Side: 2.25",Cold-Side: 2.75"; (1) Turbo to Hot Pipe Coupler (for stock turbo),(1) Turbo to Hot Pipe Coupler (for aftermarket turbo),(1) 2.25" Straight Coupler,(2) 2.75" Straight Couplers,(1) 2.75" x 3.25" Long Straight Coupler,(1) 2.00"-2.75" Transition Coupler; - Application-specific bend for this kit,- 1.25" I.D.,- 1.50" O.D.,- 4mm thick; 3.5mm; 25.5 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/ Mounting Hardware|(2) Hot Side Intercooler Pipes|(2) Cold Side Intercooler Pipes|(1) BPV Flange Adapter|(1) Turbo to Hot Pipe Coupler (for stock turbo)|(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)|(1) 2.25" - 2.5" Silicone Transition Hose|(1) 2.5" - 2.75" Transition Coupler|(1) 2.75" Straight Coupler|(2) 2.5" - 2.75" Intercooler to Pipe Hoses|(1) BPV Recirculation Hose|(2) 1.5" T-Bolt Clamps|(1) 2.00" T-Bolt Clamp|(2) 2.5" T-Bolt Clamps|(4) 2.75" T-Bolt Clamps|(5) 3" T-Bolt Clamps|(1) Bypass Valve Gasket|(2) 6" of Thermal Wrap|(1) Sound Symposer Plug; Yes; Black; Powder Coated; (2) 1.5" T-Bolt Clamps,(1) 2.00" T-Bolt Clamp,(2) 2.5" T-Bolt Clamps,(4) 2.75" T-Bolt Clamps,(5) 3" T-Bolt Clamps; Bar-and-plate; 8.05"; 28"; 28" x 8.05" x 3.5"; 3.5"; 3.5"; - Tubular Steel construction with black powdercoat,- Application-specific mounting holes,- 6.5 lbs; Made from polished mandrel-bent aluminum; 2.75"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; - 3.25" length,- 2.75" I.D.,- 3.00" O.D.,- 4mm thick; 600 whp; 30 psi; 2.75"; 8.6"; 37.7"; 5.4"; 2.5" - 2.75" Intercooler to Pipe Hoses; (1) Turbo to Hot Pipe Coupler (for stock turbo),(1) Turbo to Hot Pipe Coupler (for aftermarket turbo),(1) 2.25" - 2.5" Silicone Transition Hose,(1) 2.5" - 2.75" Transition Coupler,(1) 2.75" Straight Coupler; - Application-Specific Bend for this Kit,- 1.25" I.D.,- 1.50" O.D.,- 4mm thick; 3.5 mm; 25 lbs

Highlights: (1) Bar-and-Plate Intercooler|(5) Silicone Hoses and Couplers|(1) High-Temp Silicone \xc3\xb1S hose|(2) 3" T-bolt Clamps|(1) 2.75" T-bolt Clamp|(1) 2.25" T-bolt Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) WRX specific BPV hose|(1) STI specific BPV hose|(1) Intercooler to throttle body coupler|(1) PCV hose; No; D-759; Silver; Blue; (2) 3" T-bolt Clamps,(1) 2.75" T-bolt Clamp,(1) 2.25" T-bolt Clamp; Bar-and-Plate; 6"; 19"; 19" x 6" x 3.5"; 3.5"; 3.5"; Internal: 6.5mm fin height, 2mm fin pitch,External: 6.5mm fin height, 1.7mm fin pitch; -1.81" I.D. / 2.20" O.D. - On turbo outlet,-2.20" I.D. / 2.60" O.D. - After turbo oulet,-5mm hose thickness,-Withstands up to 400°F (204°C) temps,-Fits on turbos with 1.97" (50mm) maximum compressor outlet size,-Reinforced with 7 internal steel rings for increased durability; 2.5"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.125" length,2.75" I.D.,3.00" O.D.,4mm thick; 305; 20-22 psi; 2.75"; 11.25"; 22.25"; 3.625"; 17.5" length,.45" I.D.,.75" O.D.,4mm thick; (5) Silicone Hoses and Couplers,(1) Intercooler to Throttle Body Coupler; 1.16" - 1.30" I.D.,1.56" - 1.70" O.D.,5mm hose thickness; 1.16" - 1.30" I.D.,1.56" - 1.70" O.D.,5mm hose thickness; 3.5 mm; 17.25 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Optional Charge-Pipe|(1) Intercooler Mounting Bracket|(1) Air Diverter with Attached Rubber Gaskets|(1) Charge-Pipe to Intercooler Hose|(1) Intercooler to Throttle Body Hose|(3) Bypass Valve Hoses|(2) 3" T-bolt Clamp|(2) 3.5" T-bolt Clamp|(4) Worm-Gear Clamps|Mounting Hardware|Mishimoto Lifetime Warranty; No; Silver; Black; Powder Coated; (2) 3" T-bolt Clamp,(2) 3.5" T-bolt Clamp,(4) Worm-Gear Clamps; Bar-and-Plate; 15" x 10" x 4"; 4"; Internal: 4.7mm fin height, 2.8mm fin pitch,External: 4.7mm fin height, 1.7mm fin pitch; I.D. 2.19" at the turbo, transitioning to 2.60" at the intercooler hose,O.D. 2.75" at the intercooler hose,CHARGE-PIPE TO INTERCOOLER HOSE SPECS,2.75" I.D.,3.15" O.D.,4mm thick; 2.5"; 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.75" I.D.,3.15" O.D.,4mm thick; 450; 35 psi; 3"; 10"; 24"; 5"; ID:,2.19" at the turbo transitioning to 2.60" at the intercooler hose,OD:,2.75" at the intercooler hose; 3.5mm; 24.5 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/ Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) BPV Flange Adapter|(1) Resistor Block Relocation Bracket w/ Mounting Hardware|(2) Lower Intercooler Brackets w/ Mounting Hardware|(1) Aluminum Overflow Can w/ Mounting Hardware|(1) Turbo to Hot Pipe Coupler (for stock turbo)|(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)|(1) 2.25" Straight Coupler|(2) 2.75" Straight Couplers|(1) 2.75" x 3.25" Long Straight Coupler|(1) 2.00"-2.75" Transition Coupler|(1) BPV Recirculation Hose|(1) PCV hose|(1) 2.00" T-bolt Clamp|(4) 2.5" T-bolt Clamps|(7) 3" T-bolt Clamps|(1) 1.5" Worm Gear Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) 12" of Thermal Wrap; Yes; Black; Powder Coated; - Made from polished mandrel-bent aluminum,- 2.75" I.D.,- Includes upper and lower intercooler pipes; (1) 2.00" T-bolt Clamp,(4) 2.5" T-bolt Clamps,(7) 3" T-bolt Clamps; Bar-and-Plate; 8.25"; 28"; 28" x 8.25" x 3.5"; 3.5"; 3.5"; - Made from polished mandrel-bent aluminum,- 2.25" I.D.,- Includes upper and lower intercooler pipes; 2.75"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; - 3.25" Length,- 2.75" I.D.,- 3.00" O.D.,- 4mm thick; 600; 30 psi; 3"; 9"; 44"; 5.5"; - 17.5" length,- 0.45" I.D.,- 0.75" O.D.,- 4mm thick; Hot-Side: 2.25",Cold-Side: 2.75"; (1) Turbo to Hot Pipe Coupler (for stock turbo),(1) Turbo to Hot Pipe Coupler (for aftermarket turbo),(1) 2.25" Straight Coupler,(2) 2.75" Straight Couplers,(1) 2.75" x 3.25" Long Straight Coupler,(1) 2.00"-2.75" Transition Coupler; - Application-specific bend for this kit,- 1.25" I.D.,- 1.50" O.D.,- 4mm thick; 3.5mm; 25.5 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Optional Charge-Pipe|(1) Intercooler Mounting Bracket|(1) Air Diverter with Attached Rubber Gaskets|(1) Charge-Pipe to Intercooler Hose|(1) Intercooler to Throttle Body Hose|(3) Bypass Valve Hoses|(2) 3" T-bolt Clamp|(2) 3.5" T-bolt Clamp|(4) Worm-Gear Clamps|Mounting Hardware|Mishimoto Lifetime Warranty; No; D-759; Black; Red; Powder Coated; (2) 3" T-bolt Clamp,(2) 3.5" T-bolt Clamp,(4) Worm-Gear Clamps; Bar-and-Plate; 15" x 10" x 4"; 4"; Internal: 4.7mm fin height, 2.8mm fin pitch,External: 4.7mm fin height, 1.7mm fin pitch; I.D. 2.19" at the turbo, transitioning to 2.60" at the intercooler hose,O.D. 2.75" at the intercooler hose,CHARGE-PIPE TO INTERCOOLER HOSE SPECS,2.75" I.D.,3.15" O.D.,4mm thick; 2.5"; 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.75" I.D.,3.15" O.D.,4mm thick; 450; 35 psi; 3"; 10"; 24"; 5"; ID:,2.19" at the turbo transitioning to 2.60" at the intercooler hose,OD:,2.75" at the intercooler hose; 3.5mm; 24.5 lbs

Highlights: (1) Bar-and-Plate Intercooler|(5) Silicone Hoses and Couplers|(1) High-Temp Silicone \xc3\xb1S hose|(2) 3" T-bolt Clamps|(1) 2.75" T-bolt Clamp|(1) 2.25" T-bolt Clamp|(1) Bypass Valve Gasket|(1) Black Nylon Hose Fitting, 3/4" I.D.|(1) Black Nylon Tee Hose Fitting, 3/4" I.D.|(1) WRX specific BPV hose|(1) STI specific BPV hose|(1) Intercooler to throttle body coupler|(1) PCV hose; No; D-759; Silver; Red; (2) 3" T-bolt Clamps,(1) 2.75" T-bolt Clamp,(1) 2.25" T-bolt Clamp; Bar-and-Plate; 6"; 19"; 19" x 6" x 3.5"; 3.5"; 3.5"; Internal: 6.5mm fin height, 2mm fin pitch,External: 6.5mm fin height, 1.7mm fin pitch; -1.81" I.D. / 2.20" O.D. - On turbo outlet,-2.20" I.D. / 2.60" O.D. - After turbo oulet,-5mm hose thickness,-Withstands up to 400°F (204°C) temps,-Fits on turbos with 1.97" (50mm) maximum compressor outlet size,-Reinforced with 7 internal steel rings for increased durability; 2.5"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.125" length,2.75" I.D.,3.00" O.D.,4mm thick; 305; 20-22 psi; 2.75"; 11.25"; 22.25"; 3.625"; 17.5" length,.45" I.D.,.75" O.D.,4mm thick; (5) Silicone Hoses and Couplers,(1) Intercooler to Throttle Body Coupler; 1.16" - 1.30" I.D.,1.56" - 1.70" O.D.,5mm hose thickness; 1.16" - 1.30" I.D.,1.56" - 1.70" O.D.,5mm hose thickness; 3.5 mm; 17.25 lbs

Highlights: (1) Top-Mount Intercooler|(1) Intercooler to Throttle-Body Hose|(1) Turbo to Intercooler O-Ring Gasket; No; D-759; Silver; Black; Bar-and-Plate; 11"; 11"; 11" x 11" x 3.5"; 3.5"; 3.5"; Internal: 6.5mm fin height, 2.8mm fin pitch,External: 6.5mm fin height, 1.7mm fin pitch; 1.875"; 2.75" I.D.,3.15" O.D.,4mm thick; 350 whp; 30 psi; 2.75"; 12.5"; 18.5"; 5"; 3.5mm; 21 lbs

Highlights: (1) Top-Mount Intercooler|(1) Intercooler to Throttle-Body Hose|(1) Turbo to Intercooler O-Ring Gasket; No; D-759; Black; Black; Bar-and-Plate; 11"; 11"; 11" x 11" x 3.5"; 3.5"; 3.5"; Internal: 6.5mm fin height, 2.8mm fin pitch,External: 6.5mm fin height, 1.7mm fin pitch; 1.875"; 2.75" I.D.,3.15" O.D.,4mm thick; 350 whp; 30 psi; 2.75"; 12.5"; 18.5"; 5"; 3.5mm; 21 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Optional Charge-Pipe|(1) Intercooler Mounting Bracket|(1) Air Diverter with Attached Rubber Gaskets|(1) Charge-Pipe to Intercooler Hose|(1) Intercooler to Throttle Body Hose|(3) Bypass Valve Hoses|(2) 3" T-bolt Clamp|(2) 3.5" T-bolt Clamp|(4) Worm-Gear Clamps|Mounting Hardware|Mishimoto Lifetime Warranty; No; Black; Black; Powder Coated; (2) 3" T-bolt Clamp,(2) 3.5" T-bolt Clamp,(4) Worm-Gear Clamps; Bar-and-Plate; 15" x 10" x 4"; 4"; Internal: 4.7mm fin height, 2.8mm fin pitch,External: 4.7mm fin height, 1.7mm fin pitch; I.D. 2.19" at the turbo, transitioning to 2.60" at the intercooler hose,O.D. 2.75" at the intercooler hose,CHARGE-PIPE TO INTERCOOLER HOSE SPECS,2.75" I.D.,3.15" O.D.,4mm thick; 2.5"; 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.75" I.D.,3.15" O.D.,4mm thick; 450; 35 psi; 3"; 10"; 24"; 5"; ID:,2.19" at the turbo transitioning to 2.60" at the intercooler hose,OD:,2.75" at the intercooler hose; 3.5mm; 24.5 lbs

Highlights: (1) Bar-and-Plate Intercooler|(1) Optional Charge-Pipe|(1) Intercooler Mounting Bracket|(1) Air Diverter with Attached Rubber Gaskets|(1) Charge-Pipe to Intercooler Hose|(1) Intercooler to Throttle Body Hose|(3) Bypass Valve Hoses|(2) 3" T-bolt Clamp|(2) 3.5" T-bolt Clamp|(4) Worm-Gear Clamps|Mounting Hardware|Mishimoto Lifetime Warranty; No; D-759; Silver; Red; Powder Coated; (2) 3" T-bolt Clamp,(2) 3.5" T-bolt Clamp,(4) Worm-Gear Clamps; Bar-and-Plate; 15" x 10" x 4"; 4"; Internal: 4.7mm fin height, 2.8mm fin pitch,External: 4.7mm fin height, 1.7mm fin pitch; I.D. 2.19" at the turbo, transitioning to 2.60" at the intercooler hose,O.D. 2.75" at the intercooler hose,CHARGE-PIPE TO INTERCOOLER HOSE SPECS,2.75" I.D.,3.15" O.D.,4mm thick; 2.5"; 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2.75" I.D.,3.15" O.D.,4mm thick; 450; 35 psi; 3"; 10"; 24"; 5"; ID:,2.19" at the turbo transitioning to 2.60" at the intercooler hose,OD:,2.75" at the intercooler hose; 3.5mm; 24.5 lbs

Highlights: Silver; (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) Air Intake Bracket|(1) 2.25" 45° Coupler|(1) 2.25" to 2.75" 45° Transition Coupler|(1) 2.5" to 2.75" 55° Transition Coupler|(1) 2.5" to 2.75" 65° Transition Coupler|(1) 3.00" Straight Coupler|(1) BPV Recirculation Hose|(1) BPV Vacuum Hose|(1) 30-45mm Worm Gear Clamp|(2) 1.75" T-Bolt Clamps|(3) 2.5" T-Bolt Clamps|(2) 2.75" T-Bolt Clamps|(5) 3" T-Bolt Clamps|Mishimoto Lifetime Warranty; No; D-759; Powder Coated; -Made from Polished Mandrel-Bent Aluminum,-2.5" & 2.75" I.D. Pipes,-Includes Upper and Lower Intercooler Pipes; (2) 1.75" T-Bolt Clamps,(3) 2.5" T-Bolt Clamps,(2) 2.75" T-Bolt Clamps,(5) 3" T-Bolt Clamps; Bar-and-Plate; 8.05"; 28"; 28" x 8.05" x 3.5"; 3.5"; 3.5"; -Made from Polished Mandrel-Bent Aluminum,-2.25" I.D.,-Hot-Side has CNC-Machined Flange for a Leak Free Connection to Turbo,-Includes Two Lower Intercooler Pipes; 2.45"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 600 whp; 30 psi; 2.75"; 8.6"; 37.7"; 5.4"; Hot-Side: 2.25",Cold-Side: 2.5"& 2.75"; Aluminum; (1) 2.25" 45° Coupler,(1) 2.25" to 2.75" 45° Transition Coupler,(1) 2.5" to 2.75" 55° Transition Coupler,(1) 2.5" to 2.75" 65° Transition Coupler,(1) 2.75" Straight Coupler; 3.5mm

Highlights: Black; (1) Bar-and-Plate Intercooler|(1) Steel Crash Bar w/Mounting Hardware|(2) Hot-Side Intercooler Pipes|(2) Cold-Side Intercooler Pipes|(1) Air Intake Bracket|(1) 2.25" 45° Coupler|(1) 2.25" to 2.75" 45° Transition Coupler|(1) 2.5" to 2.75" 55° Transition Coupler|(1) 2.5" to 2.75" 65° Transition Coupler|(1) 3.00" Straight Coupler|(1) BPV Recirculation Hose|(1) BPV Vacuum Hose|(1) 30-45mm Worm Gear Clamp|(2) 1.75" T-Bolt Clamps|(3) 2.5" T-Bolt Clamps|(2) 2.75" T-Bolt Clamps|(5) 3" T-Bolt Clamps|Mishimoto Lifetime Warranty; No; D-759; Powder Coated; -Made from Polished Mandrel-Bent Aluminum,-2.5" & 2.75" I.D. Pipes,-Includes Upper and Lower Intercooler Pipes; (2) 1.75" T-Bolt Clamps,(3) 2.5" T-Bolt Clamps,(2) 2.75" T-Bolt Clamps,(5) 3" T-Bolt Clamps; Bar-and-Plate; 8.05"; 28"; 28" x 8.05" x 3.5"; 3.5"; 3.5"; -Made from Polished Mandrel-Bent Aluminum,-2.25" I.D.,-Hot-Side has CNC-Machined Flange for a Leak Free Connection to Turbo,-Includes Two Lower Intercooler Pipes; 2.45"; 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).,22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 600 whp; 30 psi; 2.75"; 8.6"; 37.7"; 5.4"; Hot-Side: 2.25",Cold-Side: 2.5"& 2.75"; Aluminum; (1) 2.25" 45° Coupler,(1) 2.25" to 2.75" 45° Transition Coupler,(1) 2.5" to 2.75" 55° Transition Coupler,(1) 2.5" to 2.75" 65° Transition Coupler,(1) 2.75" Straight Coupler; 3.5mm