Vibrant Performance Aramid Reinforced Silicone 45 Degree Elbows feature Long leg lengths and a 1-to-1 bend ratio. This elbow is intended for use in applications where pressurized tubing and connection points require a tight radius bend to accommodate the installation of piping in limited space. Our Elbows are commonly found off of turbo compressor housings; intercooler end tanks; and charge pipe assemblies.
Recommended Products: 1st Choice PN: 2793; 2nd Choice PN: 2609; 3rd Choice PN: 2867; 4th Choice PN: 12154; 5th Choice PN: 12890
| Part Notes: |
Hand wrapped and feature 4-ply reinforcement |
| Color: | Blue |
| Bend (dd): | 45DD |
| Burst Strength (ps): | 80PS |
| CLR (in): | 2.5IN |
| CLR (mm): | 63.5MM |
| Finish: | Gloss |
| Inlet ID (in): | 2.5IN |
| Inlet ID (mm): | 63.5MM |
| Leg Length (in): | 4.5IN |
| Leg Length (mm): | 114.3MM |
| Material: | 4 Ply Aramid Reinforced Silicone |
| Outlet ID (in): | 2.5IN |
| Outlet ID (mm): | 63.5MM |
| Wall Thickness (in): | 0.18IN |
| Wall Thickness (mm): | 4.572MM |
| Warranty: | 12 Months Manufacturer Warranty |
|
California Residents: Prop 65 WARNING |
