Why Create a Wish List?
- Save products for future purchase
- Organize by vehicle or job type
- Share Wish Lists with your friends
Whiteline Adjustable Camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tire life - ultimately improving overall performance. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as enhanced steering response.
To better understand the dimensions of this bushing you can use the diagram below and the data from the Highlight section
Control Arm Bushings by Whiteline. Worn control arm bushings have a huge influence on vehicle stability and braking efficiency. Replace these worn bushings with Whiteline control arm bushings for chassis control.
Features:
California Residents: Prop 65 WARNING |
Year range | Make | Model | Sub Model | Notes |
2002-2006 | Acura | RSX | Base |
In hub - adds +/- 1.0deg camber Position: Rear |
2002-2006 | Acura | RSX | Type-S |
In hub - adds +/- 1.0deg camber Position: Rear |
Year range | Make | Model | Sub Model | Notes |
2001-2005 | Honda | Civic | DX |
In hub - adds +/- 1.0deg camber Position: Rear |
2001-2005 | Honda | Civic | EX |
In hub - adds +/- 1.0deg camber Position: Rear |
2001-2005 | Honda | Civic | GX |
In hub - adds +/- 1.0deg camber Position: Rear |
2001-2005 | Honda | Civic | HX |
In hub - adds +/- 1.0deg camber Position: Rear |
2001-2005 | Honda | Civic | LX |
In hub - adds +/- 1.0deg camber Position: Rear |
2002-2005 | Honda | Civic | Si |
In hub - adds +/- 1.0deg camber Position: Rear |
2003-2005 | Honda | Civic | Hybrid |
In hub - adds +/- 1.0deg camber Position: Rear |
2004-2005 | Honda | Civic | Value Package |
In hub - adds +/- 1.0deg camber Position: Rear |
Year range | Make | Model | Sub Model | Notes |
1997-2004 | Honda | CR-V | LX |
In hub - adds +/- 1.0deg camber Position: Rear |
1998-2004 | Honda | CR-V | EX |
In hub - adds +/- 1.0deg camber Position: Rear |
2000-2001 | Honda | CR-V | SE |
In hub - adds +/- 1.0deg camber Position: Rear |
Bushing Type: | Type 1 |
OD A in mm: | 42 |
ID B in mm: | 24 |
Length C in mm: | 19.5 |
Flange Thickness in mm: | 5 |
Flange OD in mm: | 48 |
C/Tube in mm: | 25.1x12.2x47 |
Note-1: | Other bushes also contained in this kit |
Note-2: | Off center bush for alignment purposes |
Warranty: | 3 Years |