Why Create a Wish List?
- Save products for future purchase
- Organize by vehicle or job type
- Share Wish Lists with your friends
Whiteline Fixed Camber kits provide additional camber angle resulting in increased grip during cornering and traction under power. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as enhanced steering response.
To better understand the dimensions of this bushing you can use the diagram below and the data from the Highlight section
Control Arm Bushings by Whiteline. Worn control arm bushings have a huge influence on vehicle stability and braking efficiency. Replace these worn bushings with Whiteline control arm bushings for chassis control.
Features:
California Residents: Prop 65 WARNING |
Year range | Make | Model | Sub Model | Notes |
1994-1998 | Acura | Integra | RS |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1994-2001 | Acura | Integra | LS |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1995-1996 | Acura | Integra | Special Edition |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1997-1998 | Acura | Integra | Type R |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1997-2001 | Acura | Integra | GS |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1999-2001 | Acura | Integra | GS-R |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
2000-2001 | Acura | Integra | Type R |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
Year range | Make | Model | Sub Model | Notes |
1988-1989 | Honda | Civic | Wagovan |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1988-1991 | Honda | Civic | RT 4WD |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1988-1991 | Honda | Civic | Base |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1988-1995 | Honda | Civic | DX |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1988-1995 | Honda | Civic | LX |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1989-1995 | Honda | Civic | Si |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1990-1995 | Honda | Civic | EX |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1992-1995 | Honda | Civic | VX |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1992-1995 | Honda | Civic | CX |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
Year range | Make | Model | Sub Model | Notes |
1988-1988 | Honda | CRX | DX |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1988-1991 | Honda | CRX | HF |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1988-1991 | Honda | CRX | Si |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
1989-1991 | Honda | CRX | Base |
34mm OD bushing adds +/- 1.0 degrees Position: Front |
Bushing Type: | Type 1 |
OD A in mm: | 34.4 |
ID B in mm: | 21.6 |
Length C in mm: | 38.4 |
Flange Thickness in mm: | 11 |
Flange OD in mm: | 43 |
C/Tube in mm: | 22.2x1.2x4 Offset Knurled |
Note-2: | Off centre bush for alignment purposes |
Warranty: | 3 Years |