Mishimoto is proud to announce our new direct-fit oil cooler kit designed specifically for the 2010-2012 Hyundai Genesis Coupe with 3. 8L V6! High oil temperatures lead to rapid oil degradation that can result in increased engine wear and potential failure. Protect your street or track Genesis by installing the Mishimoto oil cooler kit for efficient temperature regulation. This kit includes a precision-engineered, CNC-machined aluminum oil filter housing, which replaces the factory housing and canister filter. This allows for the use of an oil sandwich plate and a conventional spin-on filter. The Mishimoto oil cooler kit includes preassembled lines and an efficient 19-row oil cooler that mounts in the front grille for optimum airflow and cooling capability. This oil cooler kit increases overall oil capacity by . 75 qt and is proven to reduce temperatures by 37 degrees F while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime WarrantyPlease note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto. com if you have any questions.
Features:
|
California Residents: Prop 65 WARNING |
| Year range | Make | Model | Sub Model | Engine Type | Liter | Fuel | Aspiration | Drivetrain |
| 2010-2010 | Hyundai | Genesis Coupe | 3.8 | V6 | 3.8L | GAS | Naturally Aspirated | RWD |
| 2010-2012 | Hyundai | Genesis Coupe | 3.8 Grand Touring | V6 | 3.8L | GAS | Naturally Aspirated | RWD |
| 2010-2012 | Hyundai | Genesis Coupe | 3.8 Track | V6 | 3.8L | GAS | Naturally Aspirated | RWD |
| 2011-2012 | Hyundai | Genesis Coupe | 3.8 R-Spec | V6 | 3.8L | GAS | Naturally Aspirated | RWD |
| Material: | 6061 Aluminum |
| Off-Road: | No |
| Cooler Color: | Silver |
| Caution: | It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected] |
| Cooler Construction: | Stacked-plate |
| Core Height: | 5.43" |
| Core Length: | 11" |
| Core Thickness: | 1.97" |
| Fitting Size: | -10AN |
| Increase In Oil Capacity: | 0.65 qt |
| Installation Torque Specs: | Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs. |
| Pressure Drop: | 3-4 PSI |
| Rows: | 19 |
| Temp Difference: | 37°F |
