Ford Oil Coolers

1986-1987 Acura Integra Mishimoto M22 X 1.5 Sandwich Plate With Rear-Mounted Thermostat

Vehicle Specific | Part #: MMOP-SPTRM22

Also Fits: 2008-2021 Chrysler 300, 2008-2009 Chrysler Aspen ... See More

Also Fits: 2008-2021 Chrysler 300, 2008-2009 Chrysler Aspen, 1995-1997 Ford Aerostar, 1992-1996 Ford Bronco, 1995-2000 Ford Contour, 1992-2011 Ford Crown Victoria, 1992-2019 Ford E-Series, 2001-2020 Ford Escape, 2000-2005 Ford Excursion, 1997-2014 Ford Expedition, 1996-2020 Ford Explorer, 2007-2010 Ford Explorer Sport Trac, 1992-2020 Ford F-150, 2004-2004 Ford F-150 Heritage, 1992-1999 Ford F-250, 1999-2010 Ford F-250 Super Duty, 1995-1997 Ford F-350, 1999-2010 Ford F-350 Super Duty, 1999-2019 Ford F-450 Super Duty, 1999-2019 Ford F-550 Super Duty, 1999-2019 Ford F53, 2011-2019 Ford F59, 2005-2007 Ford Five Hundred, 2007-2007 Ford Focus, 2005-2007 Ford Freestyle, 2006-2020 Ford Fusion, 2005-2006 Ford GT, 1992-2020 Ford Mustang, 2020-2020 Ford Police Interceptor Utility, 1995-1997 Ford Probe, 1995-2020 Ford Ranger, 2010-2010 Ford Raptor, 1995-2007 Ford Taurus, 1992-1997 Ford Thunderbird, 2014-2020 Ford Transit Connect, 1995-2000 Ford Windstar, 1984-1987 Honda Civic, 2003-2021 Lincoln Aviator, 2002-2002 Lincoln Blackwood, 1995-2020 Lincoln Continental, 2021-2021 Lincoln Corsair, 2000-2005 Lincoln LS, 2006-2008 Lincoln Mark LT, 1992-1992 Lincoln Mark VII, 1993-1998 Lincoln Mark VIII, 2011-2020 Lincoln MKZ, 1998-2014 Lincoln Navigator, 1992-2011 Lincoln Town Car, 2006-2006 Lincoln Zephyr, 1992-2002 Mercury Cougar, 1992-2011 Mercury Grand Marquis, 2003-2004 Mercury Marauder, 2005-2011 Mercury Mariner, 2006-2011 Mercury Milan, 2005-2007 Mercury Montego, 1997-2010 Mercury Mountaineer, 1995-2000 Mercury Mystique, 1995-2005 Mercury Sable, 1995-1998 Mercury Villager . See Less

Highlights: 6061 Aluminum; (1) Oil Sandwich Plate|Rubber O-ring|Built-in Thermostat (185°F / 85°C)|Stainless Steel Sandwich Plate Adapter, M22 x 1.5|(2) Black 1/8" NPT Plugs|Mishimoto Lifetime Warranty; No; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected].; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 3.19"; 2.8"; 1.18"; (2) 1/8" NPT Ports; (2) M20 x 1.5 Ports

Price: $187.95

Free Shipping

2003-2005 Ford Excursion aFe BladeRunner Oil Cooler Kit

Vehicle Specific | Part #: 46-80001

BladeRunner Oil Cooler Kit Ford Diesel Trucks 03-07 V8-6.0L (td)

Also Fits: 2003-2007 Ford F-250 Super Duty, 2003-2007 Ford F-350 Super Duty

Highlights: Limited Lifetime Warranty

Price: $339.00

Free Shipping

2016-2018 Ford Focus Mishimoto Silver Oil Cooler

Vehicle Specific | Part #: MMOC-RS-16TSL

Highlights: 6061 Aluminum; (1) Application Specific Mounting Bracket / Air Diversion Shield|(1) Bar and Plate Oil Cooler (Silver or Black)|(1) 34in Stainless Steel Braided Hose w/ -10AN Fittings|(1) 51in Stainless Steel Braided Hose w/ -10AN Fittings|(1) Oil Sandwich Plate (Thermostatic or Non)|(1) Application - Specific, 3/4" 16 extended length center bolt|(2) M20 x -10AN Straight Fittings|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; Yes; Bar-and-Plate; 6.30"; 13.98"; 1.57"; -10AN; -10AN; -10AN

Price: $840.95

Free Shipping

2014-2019 Ford Fiesta Mishimoto Black Oil Cooler Kit

Vehicle Specific | Part #: MMOC-FIST-14TBK

Highlights: 6061 Aluminum; (3) Application-Specific Mounting Brackets and Spacer|(1) 19-Row Oil Cooler (Silver or Black)|(1) 4 ft, 1 in Stainless Steel Braided Hose with 90 Degree -10AN Fittings|(1) 3 ft, 2.5 in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)|(1) Application-Specific \xc2\xbe x 16 Stainless Steel Sandwich Plate Adapter|(1) Aluminum Coolant Bypass Tube|(2) M20 x -10AN Straight Fittings|(2) 1 ft Length of Thermal Reflective Wrap|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; This oil cooler kit is designed to work without your stock liquid to liquid oil cooler unit. This kit cannot be installed in conjunction with the stock oil cooler.; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.65 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 3-5 PSI; 19; 35°F

Price: $651.95

Free Shipping

2016-2018 Ford Focus Mishimoto Black Oil Cooler

Vehicle Specific | Part #: MMOC-RS-16TBK

Highlights: 6061 Aluminum; (1) Application Specific Mounting Bracket / Air Diversion Shield|(1) Bar and Plate Oil Cooler (Silver or Black)|(1) 34in Stainless Steel Braided Hose w/ -10AN Fittings|(1) 51in Stainless Steel Braided Hose w/ -10AN Fittings|(1) Oil Sandwich Plate (Thermostatic or Non)|(1) Application - Specific, 3/4" 16 extended length center bolt|(2) M20 x -10AN Straight Fittings|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Black; Yes; Bar-and-Plate; 6.30"; 13.98"; 1.57"; -10AN; -10AN; -10AN

Price: $840.95

Free Shipping

2015-2017 Ford Mustang Mishimoto Silver Oil Cooler Kit

Vehicle Specific | Part #: MMOC-MUS4-15T

Highlights: 6061 Aluminum; (3) Application-Specific Mounting Brackets and Spacer|(1) 19-Row Oil Cooler (Silver or Black)|(1) 4' 3.5" Stainless Steel Braided Hose with 45° and 120° -10AN Fittings|(1) 4' 10.5" Stainless Steel Braided Hose with 90° and 120° -10AN Fittings|(1) Oil Sandwich Plate (Thermostatic Available)|(1) 3/4 x 16 Stainless Steel Sandwich Plate Adapter|(2) M20 x -10AN Straight Fittings|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected].; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.75 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 4-6 psi; 19; 40°F

Price: $645.95

Free Shipping

2014-2019 Ford Fiesta Mishimoto Black Oil Cooler Kit

Vehicle Specific | Part #: MMOC-FIST-14BK

Highlights: 6061 Aluminum; (3) Application-Specific Mounting Brackets and Spacer|(1) 19-Row Oil Cooler (Silver or Black)|(1) 4 ft, 1 in Stainless Steel Braided Hose with 90 Degree -10AN Fittings|(1) 3 ft, 2.5 in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)|(1) Application-Specific \xc2\xbe x 16 Stainless Steel Sandwich Plate Adapter|(1) Aluminum Coolant Bypass Tube|(2) M20 x -10AN Straight Fittings|(2) 1 ft Length of Thermal Reflective Wrap|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; This oil cooler kit is designed to work without your stock liquid to liquid oil cooler unit. This kit cannot be installed in conjunction with the stock oil cooler.; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.65 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 3-5 PSI; 19; 35°F

Price: $616.70

Free Shipping

2013-2018 Ford Focus Mishimoto Silver Oil Cooler Kit

Vehicle Specific | Part #: MMOC-FOST-13T

Highlights: 6061 Aluminum; (2) Application-Specific Mounting Brackets and Spacer|(1) 19-Row Oil Cooler (Silver or Black)|(1) 3', 8" Stainless Steel Braided Hose with Straight and 90 Degree -10AN Fittings|(1) 2', 11" Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)|(1) \xc2\xbe" x 16" Stainless Steel Sandwich Plate Adapter|(2) M20 x -10AN Straight Fittings|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected].; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.65 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 3-5 psi; 19; 30°F

Price: $688.95

Free Shipping

1995-2003 Ford E-Series Mishimoto Silver Replacement Oil Cooler

Vehicle Specific | Part #: MMOC-F2D-94

Also Fits: 2000-2003 Ford Excursion, 1994-1997 Ford F-250 ... See More

Also Fits: 2000-2003 Ford Excursion, 1994-1997 Ford F-250, 1999-2003 Ford F-250 Super Duty, 1994-1997 Ford F-350, 1999-2003 Ford F-350 Super Duty, 1999-2003 Ford F-450 Super Duty, 1999-2003 Ford F-550 Super Duty . See Less

Highlights: (1) Mishimoto Stock Replacement Oil Cooler|(2) Gaskets|(2) Oil Cooler O-Rings|Mishimoto Lifetime Warranty; No

Price: $188.95

Free Shipping

2015-2017 Ford Mustang Mishimoto Silver Oil Cooler Kit

Vehicle Specific | Part #: MMOC-MUS8-15T

Highlights: (1) Application Specific Mounting Bracket / Air Diversion Shield|(1) Bar and Plate Oil Cooler (Silver or Black)|(1) 2ft 5in Stainless Steel Braided Hose w/ -10AN Fittings|(1) 4ft 11in Stainless Steel Braided Hose w/ -10AN Fittings|(1) M22 Thermostatic Sandwich Plate|(1) Application - Specific, M22 x 1.5 extended length center bolt|(2) M20 x -10AN Straight Fittings|(2) 1/8" NPT Plugs|(1) Large O-ring|(1) Lower Radiator Hose w/ worm gear clamps|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; Yes; Requires the removal of the stock coolant based oil cooler,Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs; Bar-and-Plate; 18.5"; -10AN; 1; -10AN; -10AN; 31.7"; 10.5"; 12

Price: $800.95

Free Shipping

2015-2017 Ford Mustang Mishimoto Black Oil Cooler Kit

Vehicle Specific | Part #: MMOC-MUS8-15TBK

Highlights: (1) Application Specific Mounting Bracket / Air Diversion Shield|(1) Bar and Plate Oil Cooler (Silver or Black)|(1) 2ft 5in Stainless Steel Braided Hose w/ -10AN Fittings|(1) 4ft 11in Stainless Steel Braided Hose w/ -10AN Fittings|(1) M22 Thermostatic Sandwich Plate|(1) Application - Specific, M22 x 1.5 extended length center bolt|(2) M20 x -10AN Straight Fittings|(2) 1/8" NPT Plugs|(1) Large O-ring|(1) Lower Radiator Hose w/ worm gear clamps|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Black; Yes; Requires the removal of the stock coolant based oil cooler,Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs; Bar-and-Plate; 18.5"; -10AN; 1; -10AN; -10AN; 31.7"; 10.5"; 12

Price: $800.95

Free Shipping

2015-2017 Ford Mustang Mishimoto Black Oil Cooler Kit

Vehicle Specific | Part #: MMOC-MUS4-15TBK

Highlights: 6061 Aluminum; (3) Application-Specific Mounting Brackets and Spacer|(1) 19-Row Oil Cooler (Silver or Black)|(1) 4' 3.5" Stainless Steel Braided Hose with 45° and 120° -10AN Fittings|(1) 4' 10.5" Stainless Steel Braided Hose with 90° and 120° -10AN Fittings|(1) Oil Sandwich Plate (Thermostatic Available)|(1) 3/4 x 16 Stainless Steel Sandwich Plate Adapter|(2) M20 x -10AN Straight Fittings|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected].; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.75 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 4-6 psi; 19; 40°F

Price: $645.95

Free Shipping

2014-2019 Ford Fiesta Mishimoto Silver Oil Cooler Kit

Vehicle Specific | Part #: MMOC-FIST-14

Highlights: 6061 Aluminum; (3) Application-Specific Mounting Brackets and Spacer|(1) 19-Row Oil Cooler (Silver or Black)|(1) 4 ft, 1 in Stainless Steel Braided Hose with 90 Degree -10AN Fittings|(1) 3 ft, 2.5 in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)|(1) Application-Specific \xc2\xbe x 16 Stainless Steel Sandwich Plate Adapter|(1) Aluminum Coolant Bypass Tube|(2) M20 x -10AN Straight Fittings|(2) 1 ft Length of Thermal Reflective Wrap|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; This oil cooler kit is designed to work without your stock liquid to liquid oil cooler unit. This kit cannot be installed in conjunction with the stock oil cooler.; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.65 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 3-5 PSI; 19; 35°F

Price: $599.95

Free Shipping

2014-2019 Ford Fiesta Mishimoto Silver Oil Cooler Kit

Vehicle Specific | Part #: MMOC-FIST-14T

Highlights: 6061 Aluminum; (3) Application-Specific Mounting Brackets and Spacer|(1) 19-Row Oil Cooler (Silver or Black)|(1) 4 ft, 1 in Stainless Steel Braided Hose with 90 Degree -10AN Fittings|(1) 3 ft, 2.5 in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)|(1) Application-Specific \xc2\xbe x 16 Stainless Steel Sandwich Plate Adapter|(1) Aluminum Coolant Bypass Tube|(2) M20 x -10AN Straight Fittings|(2) 1 ft Length of Thermal Reflective Wrap|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; This oil cooler kit is designed to work without your stock liquid to liquid oil cooler unit. This kit cannot be installed in conjunction with the stock oil cooler.; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.65 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 3-5 PSI; 19; 35°F

Price: $651.95

Free Shipping

2008-2010 Ford F-250 Super Duty Mishimoto Silver Replacement Oil Cooler

Vehicle Specific | Part #: MMOC-F2D-08

Also Fits: 2008-2010 Ford F-350 Super Duty, 2008-2010 Ford F-450 Super Duty ... See More

Also Fits: 2008-2010 Ford F-350 Super Duty, 2008-2010 Ford F-450 Super Duty, 2008-2010 Ford F-550 Super Duty . See Less

Price: $179.69

Free Shipping

1980-1993 Ford Mustang Mishimoto Silver Oil Cooler Kit

Vehicle Specific | Part #: MMOC-MUS-79T

Highlights: 6061 Aluminum; (1) Application Specific Mounting Bracket|(1) 19-Row Oil Cooler (Silver or Black)|(1) 3ft, 5in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) 4ft, 1in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)|(1) 3/4 x 16 Stainless Steel Sandwich Plate Adapter|(2) M20 x -10AN Straight Fittings|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected].; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.65 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 19

Price: $482.95

Free Shipping

2004-2010 Ford E-Series Mishimoto Replacement Oil Cooler

Vehicle Specific | Part #: MMOC-F2D-03

Also Fits: 2003-2005 Ford Excursion, 2003-2007 Ford F-250 Super Duty ... See More

Also Fits: 2003-2005 Ford Excursion, 2003-2007 Ford F-250 Super Duty, 2003-2007 Ford F-350 Super Duty, 2003-2007 Ford F-450 Super Duty, 2003-2007 Ford F-550 Super Duty . See Less

Price: $151.28

Free Shipping

1980-1993 Ford Mustang Mishimoto Black Oil Cooler Kit

Vehicle Specific | Part #: MMOC-MUS-79TBK

Highlights: 6061 Aluminum; (1) Application Specific Mounting Bracket|(1) 19-Row Oil Cooler (Silver or Black)|(1) 3ft, 5in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) 4ft, 1in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings|(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)|(1) 3/4 x 16 Stainless Steel Sandwich Plate Adapter|(2) M20 x -10AN Straight Fittings|(1) Mounting Hardware Set|Mishimoto Lifetime Warranty; No; Silver; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected].; Stacked-plate; 5.43"; 11"; 1.97"; -10AN; 0.65 qt; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 19

Price: $499.81

Free Shipping

5% Off Your First Order

* Name:

* E-Mail: