H&R TRAK+ DR Series 10mm Black Wheel Spacers - Pair - H&R 20556650SW

Authorized Dealer
H&R Parts & Accessories
  • H&R TRAK+ DR Series 10mm Black Wheel Spacers - Pair - H&R 20556650SW
    • Sample Image, Actual Part May Differ

Select Your Vehicle

Ratings: (0 reviews)
  • Part#: 20556650SW
  • Original Price: $134.95
  • Our Price: $109.05
  • 0 In Stock
  • Shipping: Free Shipping

    H&R TRAK+ DR Type Wheel Spacers

    All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines:

    a) If possible, name the brand of wheel.

    b) New bolts must be longer than the original bolts by the width of the wheel spacer used.

    c) The bolt head must be identical to the existing bolt:
    Taper 60° End digit 01
    Round head for M12/d24 mm, for M14/d28 mm End digit 02
    Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03
    Flat head for Porsche original wheels M14 x 1.5 End digit 06

    d) Safety guidelines
    (Minimum number of turns for wheel bolts / nuts):
    M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
    M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
    M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
    M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
    M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
    1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length

    e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).

    Careful attention must be paid to the vehicle hub height and inner wheel bevel measurements. Failure to follow the measurement guidelines below can result in serious damage to wheel spacers, wheels, and mounting hardware.

    VehicleSystem Widening
    Per Side    		Part Num.Maximum
    Hub Height    		Inner Wheel Bevel
    ASTON MARTIN DR / 11 2265681CR 20.00mm N/A
    ASTON MARTIN DR / 11 2265681SW 20.00mm N/A
    AUDI DR / 10 2055668 13.50mm 5.0 x 45 degrees
    AUDI/PORSCHE DR / 12 2455668 13.50mm 4.0 x 45 degrees
    AUDI DR / 15 3055668 17.00mm 4.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 8 162345712 14.00mm 7.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 8 162555716 14.00mm 7.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 8 1655572 14.00mm 7.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 10 202345714 16.00mm 7.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 10 20255571 16.00mm 7.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 10 202555712A 16.00mm 7.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 10 202555712B 14.00mm 5.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 10 2055571A 15.50mm 6.5 x 45 degrees
    AUDI / VOLKSWAGEN DR / 10 2055571B 12.00mm 4.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 12 24255571 15.00mm 5.0 x 45 degrees
    AUDI / VOLKSWAGEN DR / 12 2455571 15.00mm 5.0 x 45 degrees
    BMW DR / 10 2075725 12.00mm 4.0 x 45 degrees
    BMW DR / 10 2075726 12.00mm 4.0 x 45 degrees
    BMW DR / 10 2075740 11.00mm 2.0 x 45 degrees
    BMW DR / 11 2255664 11.00mm 90 degree
    BMW DR / 12 2475725 12.00mm 2.0 x 45 degrees
    BMW/MINI DR / 12 2475726 12.00mm 2.0 x 45 degrees
    BMW DR / 12 2475740 12.00mm 2.0 x 45 degrees
    BMW DR / 12 2455664 10.00mm 90 degree
    BMW DR / 13 2655664 12.50mm 90 degree
    BMW DR / 15 3055664 12.50mm 90 degree
    CHRYSLER / DODGE DR / 10 2055665 9.00mm 90 degree
    CHRYSLER / DODGE DR / 12 2455665 10.00mm 90 degree
    FORD DRS / 10 20346331 11.00mm 2.0 x 45 degrees
    FORD DRS / 10 20356331 11.00mm 2.0 x 45 degrees
    HONDA DRS / 10 2065640 11.00mm 2.0 x 45 degrees
    HONDA DRS / 10 2065700 11.00mm 2.0 x 45 degrees
    HONDA / ACURA DRS / 10 20245616 10.00mm 2.0 x 45 degrees
    HONDA / ACURA DRS / 10 2064640 11.00mm 2.0 x 45 degrees
    MAZDA DRS / 10 20245410 11.00mm 2.0 x 45 degrees
    MAZDA DRS / 10 202454101 11.00mm 2.0 x 45 degrees
    MERCEDES-BENZ DR / 10 2055665 9.00mm 90 degree
    MERCEDES-BENZ DR / 10 20556659 N/A N/A
    MERCEDES-BENZ DR / 12 2455665 10.00mm 90 degree
    MERCEDES-BENZ DR / 12 24556659 N/A N/A
    MERCEDES-BENZ DR / 13 2655665 12.5mm 90 degree
    MERCEDES-BENZ DR / 10 20556650 10mm 90 degree
    MERCEDES-BENZ DR / 11 22556659 9mm 90 degree
    MERCEDES-BENZ DR / 12 24556650 11mm 90 degree
    MINI DR / 10 2075725 12.00mm 4.0 x 45 degrees
    MINI DR / 12 2475725 12.00mm 2.0 x 45 degrees
    NISSAN DRS / 10 2064662 10.00mm 2.0 x 45 degrees
    NISSAN DRS / 10 2065662 10.00mm 2.0 x 45 degrees
    SUZUKI DR / 10 20365601 11.00mm 2.0 x 45 degrees
    TOYOTA DRS / 10 20245414 11.00mm 2.0 x 45 degrees
    TOYOTA DRS / 10 2025541 10.00mm 2.0 x 45 degrees
    TOYOTA DRS / 10 20656014 11.00mm 2.0 x 45 degrees
    VOLVO DR / 10 2035650 11.00mm 2.0 x 45 degrees
    VOLVO DR / 12 2435650 10.00mm 2.0 x 45 degrees
    VOLVO DR / 10 20356330 11.00mm 2.0 x 45 degrees
    VOLKSWAGEN DR / 10 2055577A 15.00mm 6.0 x 45 degrees
    VOLKSWAGEN DR / 10 2055577B 12.00mm 4.0 x 45 degrees
    VOLKSWAGEN DR / 12 2455577 15.00mm 5.0 x 45 degrees

    H&R TRAK+ DR Series 10mm Wheel Spacers in Black color, 2 Pieces. DR Series wheel spacers fit between the wheel and the hub. Installation requires longer wheel bolts (Sold Separate). The wheel bolts must be ordered based on the specification of your vehicle (Taper / Round Head).

    TRAK+ DR Type Wheel Spacer by H&R. DR Series spacers fit between the wheel and hub, and require longer wheel bolts (ordered separately). Please verify bolt specifics before ordering (taper or round bolt head and shaft length). These Wheel Spacers will widen vehicle track by 6-40mm. 

    H&R TRAK+ Wheel Spacers move your wheels and tires outwards so they are more flush with the fender-instantly giving your vehicle the perfect stance! High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+ you can fill the gap in your fenders and GO WIDE! TRAK+ Wheel Spacers feature a ‘perfect fit’ hubcentric design that makes the spacer function as a precise extension of the axle hub, thereby guaranteeing precision wheel fitment. TRAK+ are designed, engineered, and manufactured by H&R Special Springs-100% Made in Germany. Constructed from a proprietary aluminum/magnesium alloy created specifically for the H&R wheel spacer program, TRAK+ Wheel Spacers are extraordinarily strong and lightweight. Additionally, TRAK+ feature a hard anodized coating for surface durability.

    Features:

    • Lightweight
    • Hard Anodized for durability and corrosion protection
    • Superior strength proprietary aluminum/magnesium alloy
    • Hubcentric for perfect fit and precise wheel alignment
    • 100% Made in Germany
    • Improve wheel and tire spacing in fender
    • Better handling
    • Increased safety
    • Fix brake caliper clearance issues
    • Add inner fender and suspension clearance

    California Residents: Prop 65 WARNING

    H&R TRAK+ DR Series 10mm Black Wheel Spacers - Pair 20556650SW is available for the following vehicles:

    Please click on next to the vehicle for specific year information.
    Year range Make Model
    2013-2016 Mercedes-Benz GL Class
    2013-2016 Mercedes-Benz GL350
    2013-2016 Mercedes-Benz GL450
    2013-2016 Mercedes-Benz GL550
    2013-2016 Mercedes-Benz GL63 AMG
    Year range Make Model
    2017-2018 Mercedes-Benz GLS Class
    2017-2018 Mercedes-Benz GLS450
    2017-2018 Mercedes-Benz GLS550
    If this H&R TRAK+ DR Type Wheel Spacers is not exactly what you are looking for to accessorize your 2013-2016 Mercedes-Benz GL Class, please don't give up just yet. Our catalog has huge selection of parts and accessories for your Mercedes-Benz GL Class.
    We will price match authorized retails. Some exclusions apply.
    We ship from multiple warehouses located across the US. Delivery times average 2-3 business days.
    We’re experts and won’t stop until you’re happy. From purchase through installation, we’ve got you covered.
    Most items can be returned within 30 days.
    Exclusions include but are not limited to custom products and items that ship via LTL freight.
    We ship our products to 90 plus countries.

    Specifications

    Color: Black
    Qty Sold: Sold in Pairs
    Width: 10mm
    Thread Type: 14x1.5
    Bolt Pattern: 5 x 112
    Center Bore: 66.5
    Bolt/ Stud: Bolt

    You May Also Like

    Visa Mastercard American Express Discover Paypal Google Pay Apple Pay