Features:
Ksports Airtech Basic system is for people who want a complete simplistic direct bolt in air suspension system. This system features a manual paddle valve system with basic front and rear up/down operation from the included switch panel. A 200 PSI dual needle gauge is mounted right next to the switches so you can easily see where your air pressure is at all times. One Viair 444C compressor is standard along with Ksports 5-gallon black steel air tank. Professional installation is recommended. All Ksport Airtech Systems feature high quality air bags, proven to handle the stress and abuse of daily driving as well as drift circuit use. Take advantage of the near infinite adjustability thanks to the adjustable lower mount, 36 levels of damping adjustment, and the unmatched height adjustability (0-120/200mm depending on vehicle) of air suspension. These air suspension kits are designed for easy bolt-on installation. No modifications to OEM shock absorbers, or OEM top mounts is required. Vehicle may need to be modified for air line routing. All Ksport Airtech Systems use VIAIR compressors and can be raised from the lowest setting to max height in as little as 2 seconds*. All hoses, wiring, and installation manuals are included.
All Ksport Airtech Kits feature high quality air bags, proven to handle the stress and abuse of daily driving as well as drift circuit use. Take advantage of the near infinite adjustability thanks to the adjustable lower mount, 36 levels of damping adjustment, and the unmatched height adjustability (0-120/200mm depending on vehicle) of air suspension. These air suspension kits are designed for easy bolt-on installation. No modifications to OEM shock absorbers, or OEM top mounts is required. Vehicle may need to be modified for airline routing. All Ksport Airtech Kits use VIAIR compressors and can be raised from the lowest setting to max height in as little as 2 seconds. All Hoses, wiring, and installation manuals are included.
Our Airtech Basic kit is for people who want a complete bare bones direct bolt-in air suspension kit. This kit features a manual paddle valve kit with basic front and rear up/down operation from the switch panel that is included. A 200 PSI dual needle gauge is mounted right next to the switches, so you can always easily see your air pressure. One Viair 444C compressor is standard along with our 5-gallon black steel air tank. Professional installation is recommended.
Most applications utilize an adjustable lower mount, which means height adjustability without losing suspension travel—a problem found in many coilover systems available today. Since mounts and most pieces in the coilover system are designed from 6061 billet aluminum, the components are lightweight, durable, and rust resistant.
Steel shock bodies are electroplated with zinc to resist rust and protect from the elements. The shock or strut valving for each piece is matched accordingly to the spring rate, giving superior ride quality and reliability.
The Ksport system uses a Monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube construction, the Monotube design dissipates heat faster and more evenly, allows finer damping adjustments, and requires more expensive design process. Aeration and cavitation issues are a lot less common in a Monotube design, which results in a more consistent ride quality.
* Airtech Pro Plus and Executive will raise your vehicle in 2-5 seconds. Basic and Deluxe require 4-7 seconds.
5 Gallon Air Tank w/ Carpeted Mounting Board
A standard black steel air tank is included with the Basic and Deluxe kits.
Manual Paddle Valves & 200 PSI Dual Needle Gauge
Manual paddle valves offer control of front and rear air bags. 200 psi dual needle gauge included along with mounting bracket for a clean install.
Viair 444c Air Compressor
Basic kits come with a single Viair 444c compressor. We chose to use Viair compressors for their reliability and performance.
Wide Range Height Adjustability
Range of lowering is 0 to 120/200mm depending on vehicle.
High Pressure Air Bags
Engineered and designed to match your vehicle. Sleeve type and double bellow type bags are available depending on what type of OEM suspension your vehicle has. Air pressure directly corresponds with how stiff or soft your car rides. Higher PSI = stiffer ride. Lower PSI = softer ride. Each car is different, and it may take some time to dial in your preferred settings.
High Performance Ksport Shock Absorbers
Every air kit comes with the same quality shocks that are standard in our Kontrol Pro coilover kits. Air kit shocks have a different internal valving setting to accommodate changes in PSI.
Adjustable Lower Mount
Adding further fine tuning of your ride height at any PSI setting you chose is the ability to have an adjustable lower mount just like our coilover kits. The benefit to this is being able to get the perfect ride height at basically any PSI you are comfortable driving at.
36 Way Adjustable Damping
All Ksport AirTech kits offer 36 levels of damping which allow you the ability to dial in your air suspension even further. Set damping softer (counterclockwise) or stiffer (clockwise) by simply inserting the included damping knob and turning it either way.
12 Month Limited Warranty
Our warranty is 12 months from the original date of purchase which covers manufacturer defects.
|
California Residents: Prop 65 WARNING |
| Year range | Make | Model | Sub Model | Engine Type | Liter | Fuel | Aspiration | Drivetrain |
| 2008-2015 | Scion | xB | Base | L4 | 2.4L | GAS | Naturally Aspirated | FWD |
Returns Policy:
This is a Special Order product, manufactured to each client's specifications and is, therefore, Non-Returnable.| Top Mount Type - Front: | Pillowball Mount |
| Top Mount Type - Rear: | Reuses OEM Top Mount |
| Bellows Material: | Rubber |
| Air Hose Material: | Nylon |
| Bellows Maximum Height: | Vehicle Specific MM |
| Bellows Minimum Height: | Vehicle Specific MM |
| Compressor Operating Position: | Horizontal |
| Maximum Compressor Pressure: | 200 PS PS |
| Voltage: | 12 Volts |
